Set Top Box Lan Port

Introduction

Wireless STB abbreviate for Wireless Set Top Box.There are many kinds of STBs are available like SD STB , Hard disk STB IPTV STB,Wireless STB etc. Just we are going to discuss here nearly wireless stb.Wireless stb makes our life easy.At that place is no any complexity of cables.We tin can move our tv with tv box to any room in abode.

What is Wireless STB

Wireless stb is a type of stb which brand us feel free to movement goggle box in whatever room.Wireless gear up pinnacle box receive the indicate via wifi and gives composite or Hard disk signal as output to tv. Equally shown in a higher place in the figure this is ARRIS wireless stb.Arris is a big company which also makes digital Headend Equipment like Arris D5 QAM.

Let us discuss near front panel functions,

(1) This is unproblematic ability push button to on and off the stb.

(ii) USB port for USB devices.

(three) Indicate strength of the receiving signal.Information technology is showing full green means signal is strong.If it gets carmine then signal is weak and movement your stb in range for proper channel viewing.

(four) It is showing that it is stb is connected to network or non.

(5) STB is receiving HD signal. glow in blue color.

(vi) PVR is recording shows.

(7) It open the menu button in the box.

(viii) These are navigating buttons for idiot box box or fix tiptop box.

Dorsum console of stb is shown above in the figure.Let us hash out betoken to indicate functions of wireless stb,

(1) This is digital sound output for home theater system.

(2) This is RJ 45 connector for bespeak.

(iii) These are RCA output gives video output to Hd TV.

(iv) This is RCA blazon video output for Tv.

(5) These two RCA type ports are for audio for your telly.

(6) This HDMI output for TV.

(7) This is power port for the stb.

What Is Gear up Top Box & STB Working Architecture

Installation Of Wireless STB

There are basically three devices used to setup, including wireless stb,

(i) Wireless STB :- The output of wireless stb is connected to tv which can be HDMI or Blended signal.

(2) VAP

VAP stands for Video Admission Point.This is individual device. VAP is connected to residential gateway via the Ethernet cable.Equally shown above in the figure 1 number shows that device is on or off.while 2 number shows the wireless network is performance properly or not.3 number shows the WPS status that it is functioning properly or non.four number shows the WPS push we need to printing it while connecting VAP to stb.

1 number is used to reset the Video Access Point.Nosotros need to press it for 5 seconds then information technology will reset.2 number shows the Ethernet port or RJ 45 port which is connected to residential gateway or RG.3 number is for ability in.iv number is ability on or off button.

(3) Residential Gateway

This is also a individual device. The output of Residential Gateway is connect to VAP.1 number shows the device ability position.2 number shows Ethernet port is on or off means traffic is sending or not.three number defines the USB status.4 number shows the wireless status.5 number shows coaxial connection status.6 number indicates the phone lines.7 shows cyberspace connexion status.eight shows RG is connected to network or not.

one number indicates the ability in socket.2 number is for reset the device.3 number shows coaxial connector for stb.4 number is for USB devices.5 number is used to connect the computer or other network devices.6 number is used for network.seven number is used for phone line.8 number is for line.9 number is for aux line.

buy now rs232 port 3 pin to 9 pin cable for stb software upgrade

Working Of Wireless STB

After connecting the above devices nosotros need to power on STB ,VAP and Residential Gateway. Information technology will take one-time to boot up the stb. After booting the stb it volition show "Printing Ok" for connecting the VAP.Now you need to press ok by the remote of stb. So press the WPS button on the VAP for two 2d.

After doing this process the VAP will connect to the stb.It will show signal as input on the stb.It will also testify WPS LED green that connection has been established.After this the stb have started receiving the indicate and now information technology will show programs on Boob tube.

This is all virtually Wireless Ready Pinnacle Box.